Home / Locations / Burlingame, CA / Surge Protection

Whole House Surge Protection in Burlingame, CA

Bayshore Electrical Services & Design installs panel-mounted surge protectors across Burlingame and San Mateo County. It's one of the quickest, most affordable upgrades we do, and it protects equipment that plug-in power strips never touch, like your air conditioner and hardwired appliances.

Call (888) 633-7804 See what's included

Answered 24/7
Price before work starts
Serving all of San Mateo County

Whole House Surge Protection services in Burlingame

Modern homes are full of circuit boards: in the refrigerator, the furnace, the washer, the garage door opener and every LED bulb. A single surge from the grid can damage them all at once. Whole house surge protection in Burlingame puts a device at your panel that clamps those surges before they reach your circuits.

Point-of-use protection

Advice on quality plug-in protectors for computers and home theater as a second layer.

Grounding and bonding checks

Surge devices rely on a good ground, so we test and correct the grounding system as part of the job.

Commercial surge protection

Service-entrance and panel protection for offices, shops and equipment rooms.

Surge protector installation

A Type 2 surge protective device wired at the main panel on its own breaker, with short leads for best performance.

Whole house surge protection

Protection for every circuit, including hardwired appliances, HVAC equipment and built-in electronics.

Subpanel and detached building protection

Additional devices for garages, shops, well houses and ADUs fed from the main.

Surge protection is worth it if

Lights flicker or dip when large appliances cycle
You've lost electronics after an outage or storm
You have solar, an EV charger or a generator
Your HVAC or appliances have electronic control boards
The panel is being replaced or upgraded anyway

Talk to an electrician in Burlingame

Tell us what you need. We'll give you a straight answer and a time we can be there.

Call (888) 633-7804

Serving Burlingame, San Mateo and Millbrae

Bay Area households are adding load quickly: EV chargers, heat pump water heaters, induction ranges and home batteries. Older 100-amp panels in Burlingame often can't absorb that without a load calculation and, sometimes, an upgrade. Wind-driven safety shutoffs in the hills also make backup power a common request.

Our whole house surge protection service also covers nearby San Mateo, Millbrae, San Bruno, Belmont, South San Francisco and Pacifica. ZIP codes served: 94010, 94011.

Whole House Surge Protection pricing in Burlingame, CA

Whole house surge protection cost in Burlingame is modest compared with the equipment it protects. The price depends on the device rating and whether the panel has a spare two-pole breaker space. Most installations take about an hour, and it's often added during a panel upgrade for little extra labor.

How the job goes, start to finish

Call (888) 633-7804Tell us what you want installed and where. Photos of the panel and the location help us quote faster.
Site check and written priceWe confirm the route, check panel capacity and give you a firm price before starting.
InstallationCable, boxes, devices and equipment are installed neatly, with a permit pulled when the job needs one.
Testing and cleanupEverything is tested and labeled, the work area is cleaned and we walk you through the result.

Whole House Surge Protection questions from Burlingame customers

Don't power strips already protect my electronics?

They help with what's plugged into them, but they do nothing for hardwired equipment like air conditioners, ovens and furnaces. A panel-mounted device protects every circuit, and the two work best together.

Where do surges come from?

Utility switching, nearby faults and lightning cause the big ones. Many smaller surges come from inside the building when motors and compressors cycle on and off.

Is surge protection required by code?

Current electrical code calls for a surge protective device when a home's service equipment is installed or replaced. It's also a sensible add-on to an existing panel.

How long does a surge protector last?

Good devices last years, but each surge wears them a little. Most have an indicator light, and we check it during any service visit in Burlingame.

What customers say

After two long outages we had a standby generator put in. They sized it properly instead of pushing the biggest unit, and showed us how the transfer switch works.
Rob H.Standby generator

After a surge took out our garage door opener and a TV, they installed a whole house protector at the panel. Quick job, clear price, no upsell.
Grace N.Surge protection

Smart switches, a video doorbell and new neutrals in a few old switch boxes. Everything works with our app and the old three-way finally makes sense.
Jenna K.Smart home wiring

More electrical services in Burlingame

Whole House Surge Protection near Burlingame

Need whole house surge protection in Burlingame?

One call, a clear price and a time that works for you.

Call (888) 633-7804