Home / Locations / Taft, CA / EV Charger Installation
EV Charger Installation in Taft, CA
Charging at home on a standard outlet adds only a few miles of range per hour. A Level 2 charger on a dedicated 240-volt circuit refills most electric cars overnight. Our EV charger installation in Taft covers the load calculation, the circuit, the charger itself and the permit.
Call (888) 633-7804See what's included
- Answered 24/7
- Price before work starts
- Serving all of Kern County
Our EV Charger Installation work in Taft
Bayshore Electrical Services & Design installs home EV charging stations across Taft, Fellows and Maricopa for every major brand: Tesla Wall Connector, ChargePoint, Emporia, Wallbox, Ford and others. We'll tell you up front whether your panel can carry the charger as it is.
Tesla Wall Connector installation
Hardwired installs up to 48 amps, including power sharing between two Tesla chargers on one circuit.
NEMA 14-50 outlet installation
A heavy-duty 50-amp receptacle for mobile connectors and plug-in chargers, with the GFCI protection code requires.
Panel capacity and load management
Load calculations, smart load-sharing devices and panel upgrades when the existing service is at its limit.
Outdoor and detached garage charging
Weather-rated equipment, conduit and trenching to driveways, carports and detached garages.
Commercial and multi-family EVSE installation
Electric car charger installation for workplaces, apartment communities and fleets, with networked or shared-power stations.
Level 2 charger installation
A dedicated 240-volt circuit, typically 40 to 60 amps, with a hardwired or plug-in charger mounted where you park.
Good reasons to install a home charger
- You're charging from a regular outlet and it can't keep up
- You have a new EV on order
- You want to charge off-peak at lower rates
- There are two EVs in the household
- Public charging is costing you time and money
Talk to an electrician in Taft
Tell us what you need. We'll give you a straight answer and a time we can be there.
Call (888) 633-7804Serving Taft, Fellows and Maricopa
Air conditioning season is when Valley electrical problems show up: breakers tripping in the afternoon, warm panels and lights that dim when the compressor starts. For Taft owners adding solar, a pool or an EV charger, a load calculation is the first step.
Our EV charger installation service also covers nearby Fellows, Maricopa, Tupman, McKittrick, Buttonwillow and New Cuyama. ZIP code served: 93268.
EV Charger Installation cost in Taft
EV charger installation cost in Taft depends mostly on the distance from the panel to the parking spot, the amperage of the circuit and whether the panel has spare capacity. A charger next to the panel is the simplest install; long runs, trenching or a panel upgrade add cost. Utility and state rebates change often, and we'll point you to the programs currently open in Kern County.
What happens when you call
- Call (888) 633-7804Tell us what you want installed and where. Photos of the panel and the location help us quote faster.
- Site check and written priceWe confirm the route, check panel capacity and give you a firm price before starting.
- InstallationCable, boxes, devices and equipment are installed neatly, with a permit pulled when the job needs one.
- Testing and cleanupEverything is tested and labeled, the work area is cleaned and we walk you through the result.
Common questions about EV charger installation in Taft
Do I need a permit for an EV charger in Taft?
Yes, a new 240-volt circuit requires a permit and inspection. We handle both. For other heavy loads, see dedicated circuit installation.
Can my panel handle an EV charger?
Many 100-amp panels can, with the right charger setting or a load-management device. We run a load calculation first. If you do need more capacity, see electrical panel upgrades.
Hardwired charger or NEMA 14-50 outlet?
Hardwired is our usual recommendation: it allows higher charging speeds, has fewer failure points and suits outdoor locations. A 14-50 outlet makes sense if you want to take the charger with you.
How long does installation take?
Most home EV charger installations in Taft take two to four hours once the permit is in hand. Long conduit runs or trenching can make it a full day.
In customers' words
They installed our Level 2 charger in the garage and explained the load calculation in plain English. Clean conduit run, no mess, and the price matched the quote.
They wired our kitchen remodel from rough-in to final. Island outlets, under-cabinet lights and all the appliance circuits. Our contractor asked for their number.
After a surge took out our garage door opener and a TV, they installed a whole house protector at the panel. Quick job, clear price, no upsell.
More electrical services in Taft
- Electrical Panel Upgrade in Taft
- Dedicated Circuit Installation in Taft
- Solar Electrician and Battery Backup in Taft
- Electrical Installation in Taft
- All electrical services in Taft
EV Charger Installation near Taft
Need EV charger installation in Taft?
One call, a clear price and a time that works for you.