24/7 emergency electrician. Call (888) 633-7804
Call (888) 633-7804

Home / Locations / Palm Springs, CA / EV Charger Installation

EV Charger Installation in Palm Springs, CA

Bayshore Electrical Services & Design installs home EV charging stations across Palm Springs, North Palm Springs and Cathedral City for every major brand: Tesla Wall Connector, ChargePoint, Emporia, Wallbox, Ford and others. We'll tell you up front whether your panel can carry the charger as it is.

Call (888) 633-7804See what's included

  • Answered 24/7
  • Price before work starts
  • Serving all of Riverside County

Our EV Charger Installation work in Palm Springs

Charging at home on a standard outlet adds only a few miles of range per hour. A Level 2 charger on a dedicated 240-volt circuit refills most electric cars overnight. Our EV charger installation in Palm Springs covers the load calculation, the circuit, the charger itself and the permit.

Panel capacity and load management

Load calculations, smart load-sharing devices and panel upgrades when the existing service is at its limit.

Outdoor and detached garage charging

Weather-rated equipment, conduit and trenching to driveways, carports and detached garages.

Commercial and multi-family EVSE installation

Electric car charger installation for workplaces, apartment communities and fleets, with networked or shared-power stations.

Level 2 charger installation

A dedicated 240-volt circuit, typically 40 to 60 amps, with a hardwired or plug-in charger mounted where you park.

Tesla Wall Connector installation

Hardwired installs up to 48 amps, including power sharing between two Tesla chargers on one circuit.

NEMA 14-50 outlet installation

A heavy-duty 50-amp receptacle for mobile connectors and plug-in chargers, with the GFCI protection code requires.

Good reasons to install a home charger

  • You want to charge off-peak at lower rates
  • There are two EVs in the household
  • Public charging is costing you time and money
  • You're charging from a regular outlet and it can't keep up
  • You have a new EV on order

Talk to an electrician in Palm Springs

Tell us what you need. We'll give you a straight answer and a time we can be there.

Call (888) 633-7804

EV Charger Installation across Palm Springs and Riverside County

Inland heat is the big factor here. Air conditioners run for much of the year, panels mounted on sun-baked walls age faster, and summer peaks expose marginal breakers. Mountain and desert areas around Palm Springs also see wind and snow outages that make backup power worth planning for.

In Palm Springs we regularly work in Deepwell Estates, Tahquitz River Estates, the Movie Colony, Racquet Club Estates, Twin Palms and Vista Las Palmas. Our EV charger installation service also covers nearby North Palm Springs, Cathedral City, Rancho Mirage, Thousand Palms, Desert Hot Springs and White Water. ZIP codes served: 92262, 92263, 92264.

EV Charger Installation pricing in Palm Springs, CA

EV charger installation cost in Palm Springs depends mostly on the distance from the panel to the parking spot, the amperage of the circuit and whether the panel has spare capacity. A charger next to the panel is the simplest install; long runs, trenching or a panel upgrade add cost. Utility and state rebates change often, and we'll point you to the programs currently open in Riverside County.

How a visit works

  1. Call (888) 633-7804Tell us what you want installed and where. Photos of the panel and the location help us quote faster.
  2. Site check and written priceWe confirm the route, check panel capacity and give you a firm price before starting.
  3. InstallationCable, boxes, devices and equipment are installed neatly, with a permit pulled when the job needs one.
  4. Testing and cleanupEverything is tested and labeled, the work area is cleaned and we walk you through the result.

Palm Springs EV charger installation FAQs

How long does installation take?

Most home EV charger installations in Palm Springs take two to four hours once the permit is in hand. Long conduit runs or trenching can make it a full day.

Do you install Tesla chargers for non-Tesla cars?

Yes. We install the Tesla Wall Connector, the Universal Wall Connector and J1772 chargers, and we'll help you choose based on the vehicles you own now and may own later.

Do I need a permit for an EV charger in Palm Springs?

Yes, a new 240-volt circuit requires a permit and inspection. We handle both. For other heavy loads, see dedicated circuit installation.

Can my panel handle an EV charger?

Many 100-amp panels can, with the right charger setting or a load-management device. We run a load calculation first. If you do need more capacity, see electrical panel upgrades.

In customers' words

They installed our Level 2 charger in the garage and explained the load calculation in plain English. Clean conduit run, no mess, and the price matched the quote.

Priya S.EV charger installation

Twelve recessed lights and two dimmers in the living room, done in a day with no patching needed. The layout advice alone was worth the call.

Tom and Linda W.Recessed lighting

We needed new circuits and lighting before opening our shop. Bayshore worked around our contractor's schedule and the inspection passed the first time.

Kevin O.Retail build-out

More electrical services in Palm Springs

EV Charger Installation near Palm Springs

Need EV charger installation in Palm Springs?

One call, a clear price and a time that works for you.

Call (888) 633-7804
Call (888) 633-7804